Supplemental Restraint System
System Servicing
To ensure its reliability, the Supple-
mental Restraint System must be
inspected by your dealer no more
than ten years after the car's date of
manufacture. This date can be found
on the certification plate attached to
the driver's door jamb.
The impact sensors for the SRS are
located behind the dashboard and
under the center console. Wiring and
other components are located near
the steering column and in the
steering wheel.
None of the components in the SRS
are user-serviceable. Doing mechani-
cal or electrical work near SRS
components, or disconnecting the
SRS wiring, could cause the airbag to
deploy accidentally or disable the
system. If your car needs service or
repair in any of those areas, have
your dealer do the work.
Scrapping the airbag, or the entire
car, without using the proper tools or
following the procedures in the
Service Manual can be hazardous.
Scrapping the airbag should be done
by your dealer.
Driver and Passenger Safety
