Acumen Ai-T40, User Manual

Page: 63 / 70

DVR User Manual
58
Q10: How to input password and digital numbers?
Click the password or the input box a small keyboard will pop up. Please select characters to
be input (the initial password is 123456), or you can use the digital keys on the front panel, or
the digital keys on the remote controller.
Q11: A hard disk is being identified as a new device however it was being used with
another DVR of same model. Should it be formatted prior use?
It is possible to migrate an HDD from one DVR to another provided that the DVRs are of the
same model and that the HDD being migrated would be used as the sole disk in the new DVR.
However in cases where the new DVR already contains a HDD, the migrated disk being
installed would have to be formatted. In general migrating disks from one DVR to another is
not recommended.
Q12: What is the minimum configuration required for remote monitoring?
PC Module Parameters
CPU Intel Celeron 2.4G
Motherboard Intel 845
HDD 80G
RAM 512M
VGA NVIDIA GeForce MX440/FX5200 ATIRADEON 7500/X300
OS Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA
DirectX 9.0
Q13: How to handle the situation that the codec Control is blocked when downloading in
the VISTA or Win7 system?
This problem can be fixed in two ways:
a.
Enter Control Panel

User Account and Family Safety

User Account Control (refer to
the following figure) and click Turn User Account on or off. Cancel Use User Account
Control (UAC) to help protect your computer.
b. Right click IE browser (refer to the following figure) and select Run as administrator to
run browser.