Acumen Ai-T40, User Manual

Page: 18 / 70

DVR User Manual
13
Fig 4-2 Setup
4.1 Basic Configuration
Basic configuration includes three sub menus: system, date & time and DST.
4.1.1 System
Step 1 : Enter into Menu

Setup

Basic

System interface. Refer to Fig 4-3:
Fig 4-3 Basic Configuration-System
Step 2 : In this interface you can setup the device name, device ID, video format, max network
users, VGA resolution, language and so on. The definitions for every parameters display as
below:
Device Name: The name of the device. It may display on the client end or CMS that help user
to recognize the device remotely.
Device ID: This ID is used to map the DVR with IR remote controller and speed dome
cameras.
Video Format: Two modes: PAL and NTSC. User can select the video format according to
that of camera.
960H Mode: This function is only applicable for 8/16 CH DVR.
Password Check: If this option is enabled, the user would need to input the user name and the
password for performing corresponding operations.