Prosody X PCI Express R1 Card – Installation Guide
Appendix F:
Ferrite clamp fitting instructions
The following diagram depicts the correct fitting of Aculab part number AC0440
Ferrite clamps. These may be fitted as required, for example, when system specific
EMC testing identifies the need for E1/T1 cable filtering.
<To Aculab Card
To PSTN >
Ferrite Clamp
RJ45
Nominal
distance = 1 inch
The ferrite clamp consists of two halves of a ferrite core encased in a hinged plastic
holder that is closed and latched around a cable up to 6mm in diameter
Please contact Aculab should you require further clarification on obtaining and using
ferrite clamps.
41 of 41
