ACU-RITE 200S READOUTS Reference Manual Download Page 60

Page: 60 / 82

II - 1 Installation Set

II - 1 Installation Setup

Installation Setup Parameters

To locate the Installation Setup screen from the normal
operating display:



Press the RIGHT, or LEFT arrow key until the SETUP soft key
is displayed



Press the SETUP soft key.

The Job Setup screen is now displayed, and the INSTALL. SETUP

soft key is displayed.



Press the INSTALL. SETUP soft key, and enter the passcode.

The Installation Setup screen is now displayed.

Installation Setup parameters are established during the initial
installation, and do not often change. For this reason, the installation
setup parameters are protected by the passcode.

See "Readout Parameter Access Code" on page iii

Encoder Setup

The ENCODER SETUP is used to set the encoder: resolution, type
(linear, rotary), count direction, and reference mark type.



Press the UP, or DOWN arrow keys until ENCODER SETUP is
highlighted.



Press ENTER.

This opens a list of possible encoder inputs.



Highlight the encoder to be setup using the UP, or DOWN
arrow keys.



Press ENTER.

Cursor will be in the ENCODER TYPE field.

Summary of Contents for 200S READOUTS



















































































Search results

Summary of Contents for 200S READOUTS

Reviews:

Related manuals for 200S READOUTS

Brands by name

Popular brands

ACU-RITE 200S READOUTS, Reference Manual

Search results

Summary of Contents for 200S READOUTS

Reviews:

Related manuals for 200S READOUTS

Brands by name

Popular brands