ACU-RITE 200S READOUTS, Reference Manual

Page: 29 / 82

200S 15
I - 2 Gener
a
l Oper
ations f
o
r 20
0S
 While in the Zero Field, press the appropriate axis keys to enable
or disable zeroing of the axis display positions when the switch
is closed.
 While in the Next Hole Field, press the ON/OFF soft key to ON to
move to the next hole within a pattern.
Console Adjustment
The LCD’s brightness and contrast can be adjusted either by using the
soft keys in this form, or by using the UP/DOWN arrow keys on the
keypad in either operating mode. The settings of brightness, and
contrast may need to be adjusted due to variations in ambient lighting,
and operator preference. This form is also used to set the display
saver’s idle time-out. The display saver setting is the amount of time
the system is idle before the LCD is turned off. The idle time may be
set from 30 to 120 minutes. The display saver can be disabled during
the current power cycle.
Language
The 200S supports multiple languages. To change the
language selection:
 Press the LANGUAGE soft key until the desired language selection
appears on the soft key, and the form.

Press ENTER to confirm your selection.
Import/Export
Job, and Installation Setup parameters can be imported or exported
using the serial port.
 Press the IMPORT/EXPORT soft key in the Setup screen.
 Press IMPORT to download operating parameters from a PC.
 Press EXPORT to upload the current operating parameters to a PC.

Press the C key to exit.