Actuator Systems ReliTouch RT-201 Installation Manual Download

Page: 57 / 88

http://www.advancedactuators.com

ReliTouch® User Manual

5) Use the down arrow to scroll thru the following options:



1. Add FP

– When this option is chosen, fingerprints can be

added for the specific User ID.



2. Add PIN

–When this option is chosen, a PIN Code can be

created, changed or deleted for the specific User ID.



3. Del FP

–When this option is chosen, the fingerprints

associated to the specific User ID will be deleted.



4. Access Time

– When this option is chosen, it allows for

timed access to be created for a specific date range, days of
the week and time frame within the days of the week for the

Specific User ID

. Again, any Acc-Time settings that were

previously made for the

LOCK

, will override any Access

Time settings for the specific User ID.

www.BuilderDepot.com

Summary of Contents for ReliTouch RT-201

























































































Search results

Summary of Contents for ReliTouch RT-201

Reviews:

Related manuals for ReliTouch RT-201

Brands by name

Popular brands

Actuator Systems ReliTouch RT-201, Installation Manual

Search results

Summary of Contents for ReliTouch RT-201

Reviews:

Related manuals for ReliTouch RT-201

Brands by name

Popular brands