Actuator Systems ReliTouch RT-201 Installation Manual Download

Page: 24 / 88

http://www.advancedactuators.com

ReliTouch® User Manual

ReliTouch

RT-201 Operations Manual

***SECURITY WARNING***

With no fingerprints or PIN Codes enrolled, the ReliTouch

RT-201 will unlock when the # button is pressed on the
keypad.

It is strongly recommended that an Administrator (User IDs
1 thru 3) DELETE ALL Fingerprints and PIN Codes
(Sections 1.7 and 1.8), prior to programming the ReliTouch

RT-201, in the event that a User has been accidentally added
prior to programming.

Definitions of Indication Beeps:

Single, Short Beep

–

Indicates the following:

- A button has been pressed.

- An operational sequence has begun.
- The door has been successfully unlocked.
- A fingerprint user has been added successfully.

Three, Short Beeps

–

Indicates unsuccessful Fingerprint/PIN

verification attempt.

Six, Short Beeps

–

Low battery alert, change batteries OR the lock has

been reset.

www.BuilderDepot.com

Summary of Contents for ReliTouch RT-201

























































































Search results

Summary of Contents for ReliTouch RT-201

Reviews:

Related manuals for ReliTouch RT-201

Brands by name

Popular brands

Actuator Systems ReliTouch RT-201, Installation Manual

Search results

Summary of Contents for ReliTouch RT-201

Reviews:

Related manuals for ReliTouch RT-201

Brands by name

Popular brands