Actuator Systems ReliTouch RT-201 Page 36 Installation Manual Download

Page: 36 / 88

http://www.advancedactuators.com

ReliTouch® User Manual

1.5 Setting the Lock Mode

There are two choices in the Lock Mode menu:



Auto

– Also known as Auto-Lock, when this mode is enabled,

the ReliTouch

RT-201 requires an enrolled fingerprint or

PIN Code to be verified to unlock the door.



TUM

– TUM stands for Temporary Unlocked Mode. When

this is enabled, the solenoid will engage and the ReliTouch

RT-201 will stay unlocked, until an Administrator sets the
lock back to Auto-Lock mode.

If an enrolled fingerprint or PIN code is verified on the lock

when TUM mode is enabled, the door will be locked
temporarily. Once the fingerprint or PIN is verified to
unlock the door, the lock will be set back to TUM
automatically.

www.BuilderDepot.com

Summary of Contents for ReliTouch RT-201

























































































Search results

Summary of Contents for ReliTouch RT-201

Reviews:

Related manuals for ReliTouch RT-201

Brands by name

Popular brands

Actuator Systems ReliTouch RT-201, Installation Manual

Search results

Summary of Contents for ReliTouch RT-201

Reviews:

Related manuals for ReliTouch RT-201

Brands by name

Popular brands