Installation and Commissioning Guide
Variable Capacity Commercial
9
Installation and Commissioning Guide- Package Ducted Variable Capacity Commercial
Doc. Part No. 0525-076 Ver. 3 210414
07. Package Unit Dimensions and Clearances
07.01. Package Models: PKV160T / PKV180T
1101
155
150
150
833
348
184
200
1188 (MTG C-C DIST)
335
740
1120 O/A
105
50
MOTOR
35
35
1150 (MTG C-C DIST)
976
1102
COMP
INDOOR
FANS
INDOOR
FANS
MOTOR
OUTDOOR COIL
518
1250 O/A
355
1490 O/A
358
CONDENSATE
DRAIN POINTS
DN 25mm PN12
NOTES:
1. Do not scale drawing. All dimensions are in mm unless
specified. Refer to corresponding unit dimensional drawing
for mounting hole details.
2. Service Access Areas and Spaces for Airflow Clearances
given above are suggested minimum based on the
condition that the spaces around the units are free from any
obstructions and a walkway passage of 1000mm between
the units or between the unit and the outside perimeter is
available.
3. Minimum service access areas and spaces for airflow
clearances are responsibilities of the installer, ActronAir will
not be held liable for any extra charges incurred due to lack
of access and space for airflow.
4. Under all circumstances, condenser air must not recirculate
back onto condenser coil. Keep all clearance free of any
obstructions.
5. STACKING OF UNITS: Ensure that minimum airflow and
clearances are met.
6. MTG C-C DIST = Mounting Centre to Centre Distance.
7. Use M12 bolt for feet mounting.
THIRD ANGLE
PROJECTION
OVERALL NOMINAL DIMENSION (H x W x L)
= 1120 x 1490 x 1250
SUPPLY DUCT (H x W) = 200 x 740
RETURN DUCT (H x W) = 348 x 1101
DRAIN CONNECTION = DN 25mm PN12
TOP VIEW
FRONT VIEW
SIDE VIEW
