Installation and Commissioning Guide
Variable Capacity Commercial
11
Installation and Commissioning Guide- Package Ducted Variable Capacity Commercial
Doc. Part No. 0525-076 Ver. 3 210414
07.02. Package Models : PKV210T / PKV240T
INDOOR
FANS
INDOOR
FANS
MOTOR
OUTDOOR COIL
COMP
150.5
PKV210-240T-T
1170 O/A
422
184
240
1310 O/A
434
740
1409 (MTG C-C DIST)
844
564
392
1710 O/A
400
50
MOTOR
35
35
1027
1154
1211 (MTG C-C DIST)
105
150.5
CONDENSATE
DRAIN POINTS
DN 25mm PN12
203
1203
NOTES:
1. Do not scale drawing. All dimensions are in mm unless
specified. Refer to corresponding unit dimensional drawing
for mounting hole details.
2. Service Access Areas and Spaces for Airflow Clearances given
above are suggested minimum based on the condition that
the spaces around the units are free from any obstructions
and a walkway passage of 1000mm between the units or
between the unit and the outside perimeter is available.
3. Minimum service access areas and spaces for airflow
clearances are responsibilities of the installer, ActronAir will
not be held liable for any extra charges incurred due to lack of
access and space for airflow.
4. Under all circumstances, condenser air must not recirculate
back onto condenser coil. Keep all clearance free of any
obstructions.
5. STACKING OF UNITS: Ensure that minimum airflow and
clearances are met.
6. MTG C-C DIST = Mounting Centre to Centre Distance.
7. Use M12 bolt for feet mounting.
THIRD ANGLE
PROJECTION
OVERALL NOMINAL DIMENSION (H x W x L)
= 1170 x 1710 x 1310
SUPPLY DUCT (H x W) = 240 x 740
RETURN DUCT (H x W) = 422 x 1203
DRAIN CONNECTION = DN 25mm PN12
TOP VIEW
FRONT VIEW
SIDE VIEW
