23
2.2.3.6 MOTION DETECT
Configure motion detection for each channel.
To configure motion detection:
1) Under STATUS, select
ON
to enable motion detection for the desired channel. Click
NEXT PAGE
for additional channels (8-channel models only).
2) Under SENSITIVITY, select
1
,
2
,
3
, or
4
. The higher the number, the more sensitive the
motion detection.
3
）
Under MD SETUP, click
SETUP
. The red motion grid appears over the selected channel
in full screen.
4) Click the blocks in the grid to enable/disable motion detection. Red=motion detection
enabled; Clear=motion detection disabled.
5
）
Right-click anywhere on the screen to return to the Motion Detection menu.
6
）
Click
APPLY
. Click
CLOSE
in the confirmation window.
7
）
Click
EXIT
in all menus until all windows are closed.
NOTE:
You can disable the MD buzzer in the Alarm Setup menu.
