AT-1212 User Guide and Specifications - 23 -
www.activetechnologies.it
Once the VI has started, the pulse waveform will be uploaded into the FPGA look-up tables on all
available channels
Press the
RUN
button to start the waveform generation
DDS and Trigger Route.vi
Software requirements: LabView 2012
This VI gives the user access to the clock generated by PXIe-6674T NI Timing board and to the
DSTARA/DSTARB clock/global trigger routing.
Set
the DDS frequency
to 156.25 MHz and fill the
Destination Terminal Array.
The Destination
Terminal Array should contain all the PXIe_DSTARA connection to the FlexRIO boards that
will provide the same reference clock to the adapter module (refer to the chassis manual).
Fill the
Destination Trigger Array
with the PXIe_DSTARB global trigger routing connections.
The FlexRIO boards will receive now the same trigger signal.
Press the
Send Trigger
button to send it to all connected FAMs.
Summary of Contents for AT-1212
Page 41: ......
