manualshive.com logo in svg

Activa SmartMop, User Manual

Share
Download
Activa SmartMop User Manual Download Page 2

TARGET GROUP 

ON DELIVERY OF THE APPLIANCE 

INTRODUCTORY COMMENT 

IDENTIFICATION DATA 

INTENDED USE 

SAFETY 

The aim of this manual is to provide customers with all the information needed to use the appliance in the safest, most appropriate 
and most autonomous way. It includes information concerning technical aspects, safety, operation, appliance downtime, maintenance, 
spare parts and scrapping . Operators and qualified technicians must read the instructions in this manual carefully before carrying out 
any operation on the appliance. If in doubt about the correct interpretation of instructions, contact your nearest Customer Service 
Centre obtain the necessary clarifications.

 

This manual is aimed at operators and qualified technicians responsible for appliance maintenance. Operators must not perform 
operations that should be carried out by qualified technicians. CLEANWILL cannot be held liable for damages resulting from failure 
to comply with this prohibition.

 

The Use and Maintenance Manual must be stored in its special pouch close to the appliance, protected from liquids and anything 
else that could compromise its legibility.

 

When the machine is delivered to the customer, an immediate check must be performed to ensure all the material mentioned in the 
shipping documents has been received, in addition to verifying that the equipment has not been damaged during transportation. If 
this is the case, the carrier must ascertain the extent of the damage at once, informing our customer service office. It is only by pro

 

-mpt action of th is type that the missing material can be obtained,and compensation for damage successfully claimed.

 

Any type of equipment can only work properly and effectively if used correctly and kept in full working order by performing the maint

 

-enance operations described in the attached documentation.You should therefore read this instruction manual carefully , consulting 
it again if issues arise while using the machine. If necessary, remember that our assistance service ( organised in collaboration with 
our dealers) is always available for advice or direct intervention.

 

For technical assistance or to request replacement parts, always give the model, the version and the serial number (written on the 
relevant plate).

 

The CLEANWILL is a scrubbing machine that cleans a wide range of flooring and dirt types by means of the mechanical action of 
the discoidal brush and the chemical action of a water-detergent solution . As it advances, it collects the dirt that has been removed 
and the detergent solution that has not been absorbed by the floor.The appliance must only be used for this purpose .

 

This scrubbing machine was designed and built for the cleaning (scrubbing and drying) of smooth, compact flooring in the commercial, 
residential and industrial sectors by a qualified operator in proven safety conditions. The scrubbing machine is not suitable for cleaning 
rugs or carpets. The appliance is only suitable for use in indoor - or at least covered - areas.

 

ATTENTION: 

the appliance is not suitable for use in the rain,or under jets of water.

 

IT IS FORBIDDEN 

to use the appliance for picking up dangerous dusts or inflammable liquids in places with an explosive atmosphere. 

In addition, it is not suitable as a means of transport for people or objects.

 

Operator cooperation is paramount for accident prevention. No accident prevention programme can be effective without the full 
co-operation of the operator who is directly responsible for machine operation. The majority of occupational accidents that happen 
both in the workplace or whilst moving are caused by failure to respect 

the most basic safety rules.  An attentive, careful operator  

is most effective guarantee against accidents and is fundamental in order to implement any prevention programme.

 

The serial number plate is located inside the device on the 
underside of the front housing, and indicates the general appliance 
characteristics (in particular, the serial number). The serial number is 
a very important piece of information and should always be provided 
together with any request for assistance or when purchasing spare 
parts.

 

SERIAL NUMBER PLATE 

TECHNICAL DESCRIPTION 

STORING THE USE AND MAINTENANCE MANUAL 

PURPOSE AND CONTENT OF THE MANUAL 

Summary of Contents for SmartMop















Reviews:

No comments

Brands by name

Popular brands

Load more brands