Activa SmartMop, User Manual

Page: 12 / 14

25
18
27 268
25. Block the handlebar in the horizontal position (Fig.21).
ATTENTION:
during this operation, do not rest your foot on
the appliance.
26. Rotate the stop lever of the command handlebar (16) in the
direction of the arrow (Fig.22).
27.
Close the command handlebar, pushing the handle (17) towards
the main part of the appliance (Fig.23).
28. Rotate the stop lever of the command handlebar (16) in the
direction of the arrow (Fig.24).
29. Position the appliance with its rear part in contact with the floor
(Fig.25).
30.
Make sure the squeegee is in the work position. If it isn't, rotate
the knob (18) in the direction of the arrow (Fig.26).
ATTENTION:
carry out this operation for both the left-hand
knob and the right-hand knob.
32. Use a damp cloth to thoroughly clean the vacuum chamber of the
squeegee (19) (Fig.29).
ATTENTION:
be careful not to lose or damage the seal (20)
above the vacuum nozzle (Fig.29).
ATTENTION: during this operation, do not rest your foot on
the appliance.
31.
Bring the squeegee coupling to the maintenance position and
shift the knob (18) outwards (Fig.27). Rotate the squeegee
coupling towards you (Fig.28).
33.
Use a damp cloth to thoroughly clean the vacuum chamber of the
squeegee (21) (Fig.30).
34.
Use a damp cloth to thoroughly clean the front rubber of the
squeegee (22) (Fig.31). Check the condition of the front rubber
blade; if the edge that is in contact with the floor is worn, replace it.
35.
Use a damp cloth to thoroughly clean the rear rubber of the
squeegee (23) (Fig.32). Check the condition of the rear rubber
blade; if the edge that is in contact with the floor is worn, replace it.
23
362
22
21
30 31
19
19
29
20
5
4
20
14
15
18 17
14
17
!
!
!
!
21
CLICK
16
22
17
23
18
26
16
24