ActionTec GT724WG User Manual Download | Manualshive

Page: 6 / 51

background image

6

PowerDSLInternet

EthernetUSBWirelessPowerDSLInternetEthernet1Wireless234USB1234

Power Light

The Power light displays the Gateway’s current status. If the Power light glows steadily green, the
Gateway is receiving power and fully operational. When the Power light flashes rapidly, the Gateway is
initializing. If the Power light is not illuminated when the Power cord is plugged in and the Power switch
is turned on, the Gateway has suffered a critical error and technical support should be contacted.

DSL Light

The

DSL

light illuminates when the Gateway is connected to a

DSL

(Digital Subscriber Line) line. When

it flashes, the Gateway’s built-in

DSL

modem is training for

DSL

service.

5 Chapter 1 Introduction

Internet Light

When the Internet light glows steadily, the Gateway is connected to the

DSL

provider.

Ethernet Lights

The Ethernet lights illuminate when the Gateway is connected via one or more of its Ethernet ports.

USB Light

The

USB

light illuminates when the Gateway is connected via its

USB

port.

Wireless Light

The Wireless light illuminates when the Gateway is activated for wireless use.

Rear Panel

The rear panel of the Gateway contains seven ports (Ethernet [4], Phone,

USB

, and Power), as well as Reset

and Power switches.

PowerUSBEthernet 4ResetPhoneEthernet 3Ethernet 2Ethernet 1

Phone Port

The Phone port is used to connect the Gateway to a

DSL

connection.

6 Actiontec 54 Mbps Wireless DSL Gateway User Manual

USB Port

The

USB

port is used to connect a computer to the Gateway via

USB

cable.

Ethernet Ports

The Ethernet ports are used to connect computers to the Gateway via Ethernet cable. The Ethernet ports
are

10/100

Mbps auto-sensing ports, and either a straight-through or crossover Ethernet cable can be used

when connecting to the ports.

Reset Switch

Depressing the Reset switch for one or two seconds will power cycle the Gateway (similar to unplugging
and then plugging in the Gateway’s Power cord). To restore the Gateway’s factory default settings,
depress and hold the Reset switch for approximately 10 seconds. The reset process will start about

10

seconds after releasing the switch.

«
...
4
5
6
7
8
...
»

Summary of Contents for GT724WG




















































Reviews:

No comments

Related manuals for GT724WG

FieldServer FS-B35 Series

Brand: MSA Pages: 25

Brand: Thompson Pages: 89

Brand: Far south networks Pages: 211

Envoy Communications Gateway

Brand: enphase Pages: 100

QUANTUM SPARK 1600

Brand: Check Point Pages: 285

Brand: Alcatel-Lucent Pages: 4

Brand: Quark-Elec Pages: 7

AirPoint 2011-BYMG

Brand: Arrive Pages: 2

AirPoint AAP-1011-BYMG

Brand: Arrive Pages: 31

Brand: Planet Networking & Communication Pages: 235

Brand: Entone Pages: 5

Brand: Telecom FM Pages: 7

Brand: Teltonika Pages: 4

Millennium IP Series

Brand: EGi Pages: 16

Brand: Weinzierl Pages: 10

Brand: CheckVideo Pages: 5

Brand: Anviz Pages: 102

Brand: 2N Pages: 152

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands