47
f
115
Actiontec 54 Mbps Wireless DSL Gateway User Manual
116
2.
When the “
TCP/IP
” window appears, select
Edit
from menu bar, then select
User Mode
.
3.
When the “User Mode” window appears, select Advanced, then click
OK
.
4.
In the “
TCP/IP
” window, select
Ethernet
from the “Connect via” drop-down list.
5.
Select
Using
DHCP
Server
from the “Configure” drop-down list.
6.
Ensure the “Use 802.3” option is
not
checked.
7.
Disregard any addresses in the
IP
Address text boxes. They will be reacquired when the first connection
is made.
8.
Click
Options
and when the “
TCP/IP
Options” window appears, select
Active
. Ensure the “Load only
when needed” option is
not
checked, then click
OK
.
9.
Close the “
TCP/IP
” window and when prompted to save changes, click
Save
.
10.
Restart the computer. The
TCP/IP
settings are configured.
To finish setting up the computer to connect with the Gateway, follow the instructions in chapter 3,
“Performing a Basic Setup,” on page 33.
117 Appendix f Non-Windows Setup
OS X
1.
From the Apple Menu, select
System Preferences
.
2.
When the “System Preferences” window appears, click
Network
.
118 Actiontec 54 Mbps Wireless DSL Gateway User Manual
3.
The Network window appears. Select
Built-In Ethernet
from the “Show” drop-down list.
4.
Select
TCP/IP
and, from the “Configure” drop-down list, select
Using
DHCP
.
5.
Click
Apply Now
and close the “System Preferences” application. The
TCP/IP
settings are configured.
To finish setting up the computer to connect with the Gateway, follow the instructions in chapter 3,
“Performing a Basic Setup,” on page 33.
Notices
