28
?
Note
: If the first computer connected to the Gateway is connected via
USB
, no other
computers can be connected in this manner. Connect additional computers via Ethernet
(see page 71).
1.
Insert the Installation
CD
in the
CD-ROM
drive of the computer. The Installation Buddy starts
automatically. Wait until the following screen appears, read the on-screen instructions, then click
Next
.
2.
Read the instructions, select
Additional Computers
by clicking on the appropriate check box, then click
Next
.
77 Chapter 7 Setting Up a Network
3.
Select
USB
, then click
Next
.
4.
When the next window appears, get the
blue USB cable
from the Quick Start Kit, then click
Next
.
78 Actiontec 54 Mbps Wireless DSL Gateway User Manual
5.
Plug one end of the
blue USB cable
into the
blue USB port
on the back of the Gateway, then click
Next
.
6.
Plug the other end of the
blue USB cable
into a
USB port
on the front or back of the computer, then
click
Next
.
79 Chapter 7 Setting Up a Network
7.
Make sure the
USB light
glows steadily green, then click
Next
.
8.
A series of congratulations windows appears. Click through them to exit the Installation Buddy.
80 Actiontec 54 Mbps Wireless DSL Gateway User Manual
The computer is connected to the Gateway via USB.
Wireless
To create a wireless network with the Gateway, see “Wireless Settings” on page 54 of this manual. After
setting up a wireless network, consult the manual of the wireless adapter connected to the computer to
connect to the Gateway’s wireless network. Computers wirelessly connected to the Gateway must have
wireless capabilities (via a
PCI
wireless adapter,
USB
wireless adapter, built-in wireless adapter, etc.).
