20
?
Note
: Activating
UP
n
P
presents a slight security risk. After finishing with the hardware or
software using
UP
n
P
, Actiontec recommends deactivating
UP
n
P
.
Time Zone
Selecting
Time Zone
in the “Configuring the Advanced Settings” screen generates the “Time Zone” screen.
In this screen, select the time zone in which the Gateway is being used.
54 Actiontec 54 Mbps Wireless DSL Gateway User Manual
Remote Syslog Capture
Selecting
Remote Syslog Capture
in the “Configuring the Advanced Settings” screen generates the
“Remote Syslog Capture” screen. In this screen, the user can configure the Gateway to allow a remote
computer to access the Gateway’s system logs.
Wireless Settings
To access the Gateway’s wireless configuration screens, select
Wireless Settings
from the menu on the left
side of the “Set Up/Configuration” screen.
This generates the “Wireless Settings” screen.
55 Chapter 4 Using Advanced Setup
Wireless
To activate the Gateway’s wireless radio, click in the circle next to
On
. To turn off wireless radio, click in
the circle next to
Off
.
ESSID
ESSID
is the network name assigned to the wireless network. The factory default setting is “
ACTIONTEC
.”
Although Actiontec recommends keeping the default value intact, the
ESSID
value can be modified, using
any combination of alphanumeric characters (i.e.,
A-Z
, a-z, 0-9). All wireless-capable computers included
on the Gateway’s wireless network must have this same
ESSID
value. (For the Actiontec 802.11b/g
Wireless
PC
Card, the
ESSID
value must be the same as the
SSID
value.)
Channel
Channel
assigns the frequency band at which the Gateway communicates. In the United States, use
channels 1-11. (The factory default value is set to 9.)
Security
There are four wireless security options:
Off
,
WEP
,
WEP+802.1x
, and
WPA
. The latter three options are
different types of wireless security.
56 Actiontec 54 Mbps Wireless DSL Gateway User Manual
Off
Selecting
Off
disables wireless security. Selecting this option allows any computer with wireless
capability and the correct
ESSID
value to join the wireless network.
WEP
