ActionTec GT701R, User Manual

Page: 56 / 159

51
Setting Up
Static IP Address
This chapter details how to set up the Modem with a static
IP
address. The first
section explains the configuration using a single static
IP
address; the second sec-
tion explains the configuration using a block of static
IP
addresses.
Configuring for a Single Static
IP
Address
To set up the Modem to use a single static
IP
address:
☞
Note : To complete this procedure, you must have access to the
Internet Service Provider (
ISP
) worksheet.
If no worksheet has
been provided, contact the
ISP
.
1.
Open the Web browser. In the address bar enter:
http://192.168.0.1
then press Enter on the keyboard.
2.
The “Main Menu” screen appears. Select Setup/Configuration .
☞
Note : If the Main Menu screen does not appear, make sure the
Ethernet cable is properly connected.
5