ActionTec DSL Modem GT701WG-QW04, User Manual

Page: 33 / 115

28
Actiontec DSL Modem User Manual
29
Chapter 5 Configuring Advanced Settings
Obtain an IP Address through PPPoE or PPPoA
Select one of these options to allow the Modem to use the Point-to-Point over
Ethernet (
PPPoE
) or Point-to-Point over
ATM
(
PPPoA
) protocol.
“ Broadband Connection via PPPoE” screen:
“Broadband Connection via PPPoA” screen:
If a User Name and Password was entered in the Installation Buddy or during
Basic Setup, it should be displayed in the “Broadband Connection via
PPP
o
E/
PPP
o
A
” screen. If not, enter the information now. If the
ISP
does not require a
username or password, click in the box next to “My
ISP
does not require a user-
name and password.”
PPP Auto Connect
If
PPP
auto connect is activated (by clicking in the appropriate check box),
the Modem will attempt to automatically reconnect the
PPP
connection if it is
dropped or disconnected during an online session.
PPP
Auto Connect is turned on
by default.