ActionTec DSL Modem GT701WG-QW04 Page 105 User Manual Download

Page: 105 / 115

100

Actiontec DSL Modem User Manual

The “Actiontec

DSL

Modem Setup Page” screen appears. In this screen, the

user can configure the

ISP

Protocol (Bridged,

PPPoA

, or

PPPoE

) and the

IP configuration (Dynamic or Static). Using the Internet Service Provider
(

ISP

) Worksheet provided by the

ISP

, enter the information in the appropriate

text boxes.
If no worksheet has been provided, contact the

ISP

Click

Save and Restart

at the bottom of the Actiontec

DSL

Modem Setup

Page screen.

The Modem will be ready to use when the Power and Internet Lights stop blinking.

For other configuration options, see chapter 5, “Configuring Advanced Settings.”

Summary of Contents for DSL Modem GT701WG-QW04




















































































































Search results

Summary of Contents for DSL Modem GT701WG-QW04

Reviews:

Related manuals for DSL Modem GT701WG-QW04

Brands by name

Popular brands

ActionTec DSL Modem GT701WG-QW04, User Manual

Search results

Summary of Contents for DSL Modem GT701WG-QW04

Reviews:

Related manuals for DSL Modem GT701WG-QW04

Brands by name

Popular brands