Actiforce Elements Liquid 270, Assembly Manual

Page: 8 / 64

50 kg
EN
English - 8.
Do not exceed the maximum permitted load of 50 kg on a column. Overloading
a table may cause breakage and close by individuals may suffer serious injuries
as a consequence.
2.4 Organizational measures
The table can best be assembled by two people. Turning the table, is a task in particular which
requires two people!
2.5 Informal safety measures
– Keep the assembly/operating manual in the place where the table is used at all times.
– Make sure that all safety information on the table (see Section 2.2, Symbols used on the table,
page 5) is legible, replacing the same if necessary.
2.6 Note for those assembling the table
– The table must be assembled/worked on by persons over the age of 16.
– The persons referred to above must have read and understood the assembly/operating
manual.
2.7 Transport and assembly
– The table must be moved by two persons only, and in such cases must be retracted.
– Do not drag or pull the table over the floor.
– Assemble the table with the supplied tools only. They are the only tools which ensur that the
screws can be tightened to the correct torque.
2.8 Use of the table
– Do not allow children to use the table unsupervised. Children may be unaware of the danger
presented by the table. They would be in serious danger of injuring themselves, possibly even
with fatal consequences.
– The table must only be used in appropriate areas (see Section 5, Technical Specifications).
– Do not use the table on an uneven surface. In such conditions it will not be steady.
2.3 Maximum weight allowed per column