EN
English - 16.
3.4.6 Clearance around the tabletop
3.4.7 Screw points on tabletop
Allow a minimum clearance of 25mm from the edge of a tabletop to a wall or moving
parts.
When changing the tabletop position (especially without using pinch protection), there
is a risk of pinching. You must therefore ensure that no people or objects are located in
the hazardous area or can reach into it.
To attach accessories under the tabletop, use only the green marked area. Don‘t screw
any screw on the top Surface of the tabletop.
Only use screws that are screwed into the material with a maximum length of 10 mm.
Cable position
Free mounting surface
Summary of Contents for Elements Liquid 270
