EN
English - 20.
6. Operation and Indicators
Observe the provisions of Section 2, Safety Information, on page 5—7, in particular:
Do not leave children unsupervised with the table. Children may be unaware of the dangers
presented by the table. They would be in serious danger of injuring themselves, possibly even
with fatal consequences. Please make sure that further adjustment is impossible when the table
is still used by children.
Do not exceed the maximum time lag of the table.
Make sure there is ample space to avoid collisions if there are objects on the work surface
such as computers or computer peripherals.
6.1 Indicators
Leave the immediate surroundings of the table at once if it starts to move spontaneously.
Under no circumstances attempt to operate the table. Have the table repaired by specialists.
Refrain from using the table until it has been successfully repaired.
Stop using the table at once if you notice anything unusual (strange sounds, smoke, etc.).
Have the table repaired by specialists. Refrain from using the table until it has been
successfully repaired.
Stop using the table at once if its safety features fail to work as they should.
Only clean the table with a dry or slightly moist cloth. Before cleaning, you must always
unplug the power cord.
Unplug the power cord during a thunderstorm or if you do not intend to use the table
for a longer period. The control unit might otherwise be damages by power surges.
Summary of Contents for Elements Liquid 270
