P218703
ADt 001 M
B
© 2021 « Any reproduction of this document whether total or partial without the written consent of ACTIA Automotive is forbidden”
Page 26 sur 37
5.
SIM card installation or replacement:
Warning: The SIM card connector shall be handled with care to prevent any mechanical damage and
with protections to avoid any component damage by ESD. Proceed step by step as defined below:
6.
Battery pack replacement:
a.
Unplug the battery pack : Unplug the connector by pressing the locking system
b.
Assemble brand new AC16 battery spare part (ACTIA reference AC968975) :
i.
Connect the battery connector
ii.
Check that it is correctly locked
iii.
Install battery pack by pushing it on inside the compartment
iv.
Separate battery cable wires as in below picture to avoid wires to be pinched when
closing the trap door
