P218703
ADt 001 M
B
© 2021 « Any reproduction of this document whether total or partial without the written consent of ACTIA Automotive is forbidden”
Page 28 sur 37
VII.12
I
NVIOLABILITY LABEL REPLACEMENT
:
Required material:
-
Isopropyl alcohol (few ml)
-
Soft cloth
-
A new inviolability label :
o
AC525470 – White label
o
AC525471 – Blue label
o
AC525472 – Yellow label
Procedure:
The following steps must be respected in order to replace an inviolability label on TGU-R (here with white label as
example):
1-
Unstick slowly the inviolability label by starting from one of the upper corners (see pictures below)
2-
Once the inviolability label totally removed, put some isopropyl alcohol on a soft cloth, then clean quietly the
adhesive prints with the soaked cloth.
3-
Once the inviolability label zone is fully cleaned, let dry isopropyl alcohol for approximatively 1 minute.
