8
o
[TREBLE]
- varies from -10 to +10
o
[LOUDNESS]
-
switch ON of OFF
o
[EQUALIZER]
- ROCK / OPERA / POP / VOICE / FLAT
Adjust of Beep/ Radio Region/ Radio RDS
By holding
[VOL KEY_PSG]
or
[VOL KEY_DRV]
for 5s, the special menu of configuration
appears and the following items can be configured:
Beep
BEEP ALL : Whenever a key is pushed or held in the front panel it will sound a short beep
BEEP 2ND: Only when holding key function is activated it will sound a short beep
BEEP OFF: No beep will be played.
Band region
The
radio
band
range
can
be
adjusted
according
to
the
current
region
ASIA/EUROPE/AMERICAS.
RDS ON/OFF
The RDS function can ENABLED/DISABLED. The respective icon
RDS
will indicate it.
Selecting a source (SRC)
Press SRC in the respective area to switch between AUX, DISK, USB, RADIO and MIC
sources.
Loading a Disc
Insert a disc into the disc loading slot
Ejecting a Disc (
0
)
Press the
0
button to eject disc
NTSC /PAL System
Press
NTSC /PAL
button to switch between PAL, NTSC, AUTO system.
Reset
Reset
button is placed on the left of front panel.
The reset button is to be activated for the following reason:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
3.1. AUXILIARY SOURCE (AUX)
Source selection
Push the SCR key until
AUX
icon
is selected and the AUX input broadcast will be reproduced.
Audio By-pass function
1. When the product is switched off but power supply is still present (cable B+ still connected to
battery) the A/V AUX inputs are switched to the A/V Output, allowing to watch and listen to the
AUXILIARY source without necessity to change the electrical installation on the vehicle.
2. This functionality can be enable/disable by performing a long press on "
DISP
" key, when AUX
source is selected, until it is displayed the message "AVBP ON" or "AVBP OFF" on LCD, then
press "
▼
DIR" or "
▲
DIR" to select the function.
3.2. DISK SOURCE (DISK) / USB SOURCE (USB)
Source selection
Push the SCR key until
DISK
icon
is selected, in order to play the content of CD or DVD.
Plug the USB stick in the designated port and push SRC key until
USB
icon is selected in order
