4
2. INSTALLATION
2.1. PRECAUTIONS
•
Choose the mounting location carefully so that the unit will not interfere with the normal driving
functions of the driver.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct
sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive
vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
NOTE:
Keep the release key in the safe place as you may need it in future to remove the unit from the vehicle.
2.2. ELECTRICAL CONNECTIONS
The rear electrical connections are detailed in the drawing below
NOTE:
ACC (Red) must be connected by car ignition key in order to avoid that car battery
becomes weak when the car will be not used for long period.
Maintenance
FUSE REPLACEMENT
If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after
the replacement, there may be an internal malfunction. In this case, consult your nearest
repairing center.
Warning
Use the specified amperage fuse for each lead. Use of a higher amperage fuse may cause
serious damage.
