17
--Signal to Noise Ratio (A-weighted): .....................
≥
80dB
--Frequency Response:.......................................... 20Hz to 20KHz ±3dB
--Channel Output Difference: ................................. 3dB Max
RADIO LINE OUTPUT (stereo)
--Output Level: ...................................................... 0.5Vrms into 10K
Ω
Load
--Output impedance: ............................................. 600
Ω
--THD+ Noise: ........................................................
≤
0.5%
--Signal to Noise Ratio (A-weighted): .....................
≥
80dB
--Frequency Response:.......................................... 50Hz to 3.5KHz ±3dB
POWER AUDIO OUTPUT (4ch – rear L&R/ front L&R)
--Nominal Load (speaker)....................................... 4
Ω
(
≥
4
Ω
allowed)
-- Recommended Operating Power output .............
≤
4 x 15W RMS THD1% @4
Ω
& 28V
-- Max Power output ............................................... 4 x 20W RMS THD10% @4
Ω
& 28V
4 x 10W RMS THD10% @4
Ω
& 14V
--R-L Channel separation (crosstalk)......................
≥
60dB
--Tone controls:
o
Bass:
freq 100Hz
Gain
±
10dB
o
Treble:
freq 10kHz
Gain
±
10dB
o
Loudness:
Gain
±
7dB
RADIO PERFORMANCE:
--Regions:
ASIA/EUROPE
FM range 87.50MHz to 108.00MHz / step 0.05MHz
AM range 522 KHz to 1620KHz
/ step 9KHz
AMERICAS
FM range 87.50MHz to 108.00MHz
/ step 0.10MHz
AM range 520 KHz to 1710KHz
/ step 10KHz
FM TUNER
--Signal to Noise Ratio (IEC-A network): ................ 55dB
--Usable Sensitivity: ............................................... 13dB
µ
V (4.4
µ
V/75
Ω
mono, S/N: 30dB)
AM TUNER
--Signal to Noise Ratio (IEC-A network): ................ 53dB
--Usable Sensitivity: ............................................... 29dB
µ
V (S/N: 20dB)
ANTENNA VOLTAGE OUTPUT
--The equipment has a voltage output to connect to amplified radio antennas
--Output voltage: .................................................... 13V
±
0.5V
--Power supply capability: ......................................
≤
300mA
MICROPHONE:
--Two microphone inputs, DRIVER and GUIDE.
*Only one can be used at time, they cannot work simultaneously.
