www.acti.com
Hardware Manual
17
Step 3: Waterproof the Cable Connections
The camera itself is waterproof, however take note that the cable connections are not.
If the camera is mounted directly on the wall where the cables pass through the wall, then your
installation is complete and you do not need to waterproof the cable connections.
However, if the camera is mounted where the cables may be exposed then it is recommended to
waterproof the cable connections or use a junction box.
The camera comes with a
Cable Gland
and
Conduit Gland
. It is recommended to use one of
these glands when a high PoE injector will be used with the camera. However, if the bundled
power adaptor will be used or digital input/output devices will be connected (see
How to
Connect Digital Input / Digital Output Devices
on page 35), it is recommended to house the
cables inside the junction box (see
How to Use the Junction Box
on page 26).
Cable Gland
Conduit Gland
For use with an exterior-grade Ethernet cable
(not included in the package).
See
How to Waterproof the Cable Using
the Cable Gland
on page 18.
For use with 1/2” flexible conduit (not
included in the package).
See
How to Waterproof the Cable Using
the Conduit Gland
on page 22.
