www.acti.com
Hardware Manual
10
6)
Power Button
The power button is used to restart the camera. In case there is a need to restart the camera,
press the power button (using a pointed object, such as a pen or pin).
7)
Power LED
The Power LED lights red when the camera is powered up.
8)
Reset Button
The reset button is used to restore the factory default settings of the camera, including the
administrator
’s password.
The reset button can be used for following purposes:
1.
The administrator
’s password has been forgotten and therefore the camera cannot be
accessed.
2.
In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
3.
In case of connectivity issues or abnormal video quality.
How to do the reset properly?
Step 1:
Disconnect the power supply (e.g. disconnect the power adaptor or the high PoE
injector).
Step 2:
Press and continue to hold the reset button (using a pin).
Step 3:
Connect the power supply while keeping the reset button pressed.
Step 4:
Wait for 45 seconds and release the reset button.
