7
PALS Installation Manual
INSTALLING THE SOFTWARE AND HARDWARE
Computer:
1.5 gHz Pentium 4 with 256MB RAM, 20GB hard drive, 48X CD ROM, 2 to 8 serial ports
Mouse:
PS2, or bus mouse
Monitor:
17” SVGA
Line Printer:
Optional (parallel port required)
Page Printer:
Optional (parallel port required)
Backup Power:
Optional
Network:
Optional (100Mb connections recommended)
The Crisis Controller©™ software comes on a CD and can be used for either a new installation or upgrade of a
previous version.
Prior to a new installation or upgrade of the Crisis Controller©™ software, verify that
Crisis Controller©™ is not running, or in the process of upgrading either on the current
machine or on a machine attached via the network. Irrevocable damage to your data
may result.
To install the software on the hard drive:
• Insert the CD into the drive.
• From the “Run” command, type “d:\setup” where “d” is the letter of the diskette drive.
The Setup program will assist you step-by-step in the installation or upgrade of the Crisis Controller©™ software.
Please carefully read and follow the instructions during the installation. Once the questions are answered, the
installation of the Crisis Controller©™ software will proceed automatically.
Typical (Minimum) Computer System Requirements
How to Install the Software
