TC110 Series
Water Temperature Control Units 882.03888.00
•
09/19/2018
20
3-9
Making System Purge Connections
TC110 Series systems equipped with the System Purge option have a compressed air inlet
marked MOLD PURGE. Connect to a clean, dry 100 psig (690 kPa/6.9 bar) air line. Install
your own shutoff valve to prevent process liquid from backing up into the plant air piping if
the compressed air is turned off and the check valve fails. Don’t depend on the solenoid
valve to hold water pressure in the temperature control unit.
Figure 3: Typical Piping Schematic
