TC110 Series
Water Temperature Control Units 882.03888.00
•
09/19/2018
18
3-6
Process Water Considerations
Raw Water
Water treatment is vital in any piping system. In some cases, raw water may be used in the
system without problems; in other cases, it can result in large deposits of scale and
corrosion.
The ACS Group offers a complete line of water treatment equipment. Contact your sales
representative for water testing and treatment options.
3-7
Making Process Water Connections
On the back of each unit, the connections are labeled appropriately. Connect the TO
PROCESS hookup to the entrance of the process and the FROM PROCESS hookup to the exit
of the process. Connect the COOLING WATER
IN to your plant water supply. Connect the COOLING WATER OUT line to an open drain, or
to the return line of your central water system.
Make sure you carefully select the connecting lines and connectors between the
temperature control unit and the process to suit the needs and requirements of your
application.
If your unit has a maximum operating temperature of 250°F (121°C), the connecting lines
and connectors should have a service rating of at least 250°F (121°C) and 150 psig (1034
kPa/10 bar).
TO PROCESS — 1½” NPT
This is the outlet for the tempered water leading to the process being controlled.
FROM PROCESS — 1½” NPT
Water from the process re-enters the TC110 Series system to be tempered and re-circulated
back into the process.
