29
A1207 PenGauge
© 2022 Acoustic Control Systems – ACS Group
Application software
Application software
Digital result
The top part of the view contains the digital result of measurement in corresponding units.
Clicking and holding on the unit label switches between metric and the imperial system of
measurement.
The value of each cell is converted to the corresponding units (mm or inch) after
switching the measurement units. However, the A-Scan plot remains unconverted.
The panel also contains some informational pictograms:
Picto
gram
Functions
Contact status: no contact
Contact status: there is contact
ACF – Auto
Correlation
Function
Algorithm used for result computation
First negative
peak
Intersection with
zero
No measurement
Automatic mode
Mode of a device, clicking and holding on the pictogram
switches between manual and automatic modes. In
manual mode, you can manually change the signal
evaluation parameters.
Manual mode
(currently
unavailable)
Applied sound velocity value
Applied gain value
Plot with A-Scan
Under this panel, you can see the plot where the ultrasonic pulse-echo signal is shown.
Measurement control
In the lower part of the view, there are several buttons to control the measurement.