14
A1207 PenGauge
© 2022 Acoustic Control Systems – ACS Group
Operation manual
Operation manual
1.4.3
Replacement of the transducer capsule
The user can independently replace the worn out piezoelectric transducer capsule
without any additional tools. The figure below shows a sample of a capsule.
To replace the capsule of the transducer, proceed as follows:
·
Switch off the instrument;
·
Unscrew the tip;
·
Disconnect the capsule from the instrument (see figure below).
·
Reinsert a new capsule;
·
Screw in the tip
After the capsule is replaced, calibrate the device using the calibration sample (see
).
12