15
A1207 PenGauge
© 2022 Acoustic Control Systems – ACS Group
Operation manual
Operation manual
1.4.4
Common troubleshouting and remedies
Operators experiencing troubles during the instrument operation or having any questions
relating to its operation, please immediately contact the manufacturer's representatives.
1.5
Storage
А1207 Ultrasonic Thickness Gauge should be shelf stored in the bag included in the
delivery kit of the instrument.
The arrangement of the instruments in warehouses shall enable their free movement and
unrestricted access to them.
The distance between the instruments and the walls, floor of the warehouse, and other
warehoused instruments shall be at least 100 mm.
The distance between the heating of a warehouse and the instruments shall be at least
0.5 m.
The storage room shall be free from the current-conducting dust, admixtures of
aggressive gases, and corrosive vapors able to attack the instruments.
1.6
Transportation
А1207 Ultrasonic Thickness Gauge should be transported in the bag included in the
delivery kit of the instrument.
The transportation conditions with regard to the impact of the external environment
climatic factors should correspond to storage conditions.
Any vehicle type can transport the packaged instruments for any distance without speed
restrictions.
One should fasten the packaged instruments properly in the transport vehicle. One
should protect the packaged instruments from precipitation and water splashes during
transportation in an open transport vehicle.
One should fix the packaged instruments properly and steadily to prevent shocks of
devices against each other and against vehicle walls during transportation.
The transportation conditions should conform to the technical conditions and regulations
applicable to each type of transportation.
If shipped by air, properly packed instruments should be placed in hermetically sealed
and heated compartments.
If the transportation conditions differ from the operation conditions, the instruments shall
be kept under normal environmental conditions for at least 2 hours before use.
1.7
Appendix A
The table below presents the propagation speeds of the longitudinal ultrasonic waves in
some materials.
Table 2: Sound v elocities in some materials
Material
Velocity, m/s
Aluminium
6260
Aluminium alloy D16Т
6320
