Marvair Scholar 2.0 I&S Manual 08/2021 Rev.2
64
1.03 PLENUM INSTALLATION
1. Prior to mounting the plenum on top of the Scholar 2.0 unit, remove the front panel from
the plenum. Retain the screws (red arrows) for reinstallation after the plenum has been
installed.
2. On the top panel of the Scholar 2.0 unit, locate the 6 holes that correspond with the six
mounting holes in the plenum.
3. After the front panel has been removed, lift the plenum onto the top of the Scholar 2.0 unit.
WARNING
THE PLENUM IS HEAVY. USE CARE WHEN PLACING THE PLENUM ON TOP OF THE
SCHOLAR 2.0 HEAT PUMP OR AIR CONDITIONER.
4. Locate the 6 holes on the side flanges (3 on each side) of the plenum.
5. Secure the plenum to the Scholar 2.0 unit with the six ½” hex head screws.
6. Attach the front panel top the front of the plenum with the six screws. Make sure that the two
screws located between the supply grilles are at the top.
7. Adjust the vanes on the grilles to deliver the optimize air flow to the classroom.
