Acrosser Technology AIV-HM76V0FL Series, User Manual

Page: 34 / 107

Appendix : Status LED
LED
Flash number
Status
0 (constant ON) Power Output runs normally
1 Standby mode (Normally turned off after hard off delay)
2 Power ON Delay
3 Boot up Delay
4 Soft off delay.
5 Shutdown Delay
6 Hard OFF Delay
4 System is turned off because battery voltage is too low.
5 System on/off fail. When motherboard cannot turn on or
turn off after retry.
When there is abnormal condition happens, the LED will flash a 1.5 seconds
pulse followed by numbers of 250 ms pulse to indicate the error condition.
LED
Flash number
Error status
1 System cannot be turned on or was turned off because
battery voltage is below the Battery Low Voltage.
2 System on fail. When motherboard cannot turn on or turn off
after retry.
34