Supervisor's Operation
In this mode, you can transfer the card numbers by pushing buttons as well as inserting time
cards.
68
2
Push the "CARD TRANSFER"
button for two seconds. When you
have a card that you are using, the
number of cards that you are using
will be shown on the display. If
there are no cards used at the
present state, it will show "n0 00"
and will end the mode.
3
After the numbers of cards are
shown, in the example, push the [+]
or [-] button to show the card
number "003" and then push the
[SET] button. (Or insert the card
"003".)
4
Push the [+] or [-] button to pick a
new card number "017" and then
push the [SET] button.
(Or insert the card "017".)
5
Now calculation data (total) of the
previous card has been transferred.
Note: When you transfer data by
inserting a card, "Date/time",
"TRANSFER (in the selected
language)", and "the previous
card No. to a new card No."
are printed on the new card.
6
When the card number is changed,
this mode will finish.
1
Open the front cover and push the "SETTING START/END" button. At that moment,
" " is indicated on a display.
The number
of cards
SET
SET
CARD
TRANSFER
SET
62
Summary of Contents for ES1000
Page 1: ...USER S MANUAL ...
