59
To uninstall (remove) a Biometrics Device:
1. Click "Remove Device" below the drop down.
Employee FIU Verification
If you have Biometrics Functionality enabled your employees will be required to verify their
fingerprint before Attendance Rx will allow them to clock IN or OUT.
Once an employee enters their PIN and click "PUNCH" or "PUNCH AND CLOSE" a dialog box
will be displayed requesting their FIU verification.
Please follow the instructions on the screen which will tell you where to place your finger and
whether the verification was successful.
Employee Biosense Setting
If an employee’s Biosense setting is set to zero, they will not be required to verify their
fingerprint. The system will proceed as though Biometrics were not enabled.
More about Employee FIU Enroll and Biosense
Employee FIU Enroll
When
Biometrics Functionality
is enabled you will need to enroll each employee’s fingerprint on
those workstations where that employee will clock IN or OUT.
NOTE: The "Enroll FIU" button will only be visible when Biometrics Functionality is enabled.
To enroll and employee’s FIU:
1. Go to the Employee screen in the Administrator by clicking "Employees" on the left side the of
the Administrator.
2. Select the row for the given employee and click Enroll FIU. The dialog displayed below will
show.