22
•
Overtime 1:
08:00
•
Overtime 2:
12:00
Editing the Daily Overtime Threshold Values:
1.
From the main window of Attendance Rx, click the Setup icon, or enter the View menu and
choose Setup.
2.
Move your cursor to the Daily Overtime value. Change this value to the desired setting for each
of the two available levels.
3.
Select Save to save your changes. To quit without saving changes, select another option from the
left hand navigation and select No in the Save Changes dialog box. To restore your original
settings, click Refresh in the top right hand corner and select No in the Save Changes dialog box.
Editing the Weekly Overtime Threshold Values:
1. From the main window of Attendance Rx, click the Setup icon, or enter the View menu and choose
Setup.
2.
Move your cursor to the Weekly Overtime value. Change this value to the
desired setting for each of the two available levels.
3. Select Save to save your changes. To quit without saving changes, select another option from the left
hand navigation and select No in the Save Changes dialog box. To restore your original settings, click
Refresh in the top right hand corner and select No in the Save Changes dialog box.
Disable Overtime
You can disable overtime by setting the values to zero hours.
7
7
t
t
h
h
D
D
a
a
y
y
O
O
v
v
e
e
r
r
t
t
i
i
m
m
e
e
When enabled, 7th Day Overtime will promote all hours worked on the seventh consecutive
worked day to the next higher pay level (Overtime 1 or Overtime 2), provided that the 7
consecutive days start at the beginning of the a given week of the pay period. This rule affects
only the Daily Overtime calculations and will not overwrite any Weekly Overtime rule settings.
Note: This feature was added to accommodate a law commonly referred to as California
Overtime.
To enable 7
th
Day Overtime:
•
From the main window of Attendance Rx, click the Setup icon, or enter the View menu and
choose Setup.
•
Click on the 7th Day Overtime checkbox.
•
Select Save to save your changes. To quit without saving changes, select another option from the
left hand navigation and select No in the Save Changes dialog box. To restore your original
settings, click Refresh in the top right hand corner and select No in the Save Changes dialog box.