ATR480 Time Recorder
|
User’s Manual
11
Set Password (Mode ES05)
To set a password for the device when entering programming mode, enter ES05 mode to begin.
Press ‘ Enter ’ when ‘ ES05 ’ appears on the screen when entering programming mode.
Code 01: Enable or Disable Password
Press ‘ + ‘ or ‘ – ‘ to enable or disable the password functionality
Select ‘ 00 ‘ to disable passwords
Select ‘ 01 ‘ to enable passwords
Press ‘ Enter ‘ to confirm the selection
Code 02: Set Password
Requires Password to be enabled
Press ‘ + ‘ or ‘ – ‘ to adjust the 1
st
password entry
Press ‘ Enter ‘ to confirm the selection
Press ‘ + ‘ or ‘ – ‘ to adjust the 2
nd
password entry
Press ‘ Enter ‘ to confirm the selection
Press ‘ + ‘ or ‘ – ‘ to adjust the 3
rd
password entry
Press ‘ Enter ‘ to confirm the selection
Press ‘ + ‘ or ‘ – ‘ to adjust the 4
th
password entry
Press ‘ Enter ‘ to confirm the selection
Note: make sure you write down your password and store it in a secure place.
Note: If a password has been set on the clock, a “– – – –“ prompt will appear when
entering Program Mode. You will need to enter your password to access the clock
menus. If you misplace your password you will need to contact Acroprint at
(800) 334-7190 for assistance to reset your password.
