Clicking
Finish
on the last wizard page allows Acronis PartitionExpert
to create a
pending operation list
for new partition creation (these ac-
tions may only modify an existing operation as well. See 2.4.5 «Modifying
pending operations»).
The list will include not only the operation of partition creation itself,
but also operations of partition resize for creating a new partition.
5.
If you want to create a new partition and there is no free space on disks:
Run the create partition wizard, by clicking
Create a new partition
.
You will immediately see the
Select Hard Disk Drive
wizard page, pass-
ing the
Action Selection
page.
Further actions for partition creation are the same as described in
#4.2–4.5 of 3.1 «Creating A New Partition».
Clicking
Finish
on the last wizard page to allow Acronis
PartitionExpert to create a
pending operation list
for new partition crea-
tion (these actions may only modify an existing operation as well. See
2.4.5 «Modifying pending operations»).
3.2
Increasing Partition Free Space
You may need to increase partition free space in some cases:
•
There is no free space to install new applications or store data,
•
Some programs, like defragmenters, may stop working correctly if parti-
tion free space is smaller than a certain value,
•
Reducing system partition free space below a certain value might cause
operating system problems.
Increase free space wizard will enable you to enlarge a partition using other
partitions free space. If there is not enough free space in other partitions, it
can use unallocated disk space.
30
Chapter 3 : Automatic Partition Operations
