XVME-6700A
USER
’S
MANUAL
Acromag, Inc. Tel: 248-295-0310
- 36 -
http://www.acromag.com
- 36 -
https://www.acromag.com
4.0 FIRMWARE/BIOS INFORMATION AND CONFIGURATION
4.1 XVME-6700A Special BIOS Features
This section contains information on configuring features specific to the
XVME-6700A. For other, more generic BIOS setup information, refer to
The
APTIO Haswell Core BIOS Manual For Acromag Products.
To access the XVME-6700A specific items in the BIOS setup, select the
Acromag menu item.
Fig. 4.1.a: Acromag BIOS Setup Menu
•
The GPO0-3 default output levels can be configured. Note that these outputs are only
available with the 'XVME-6300 Compatible I/O' build option.
•
The default output levels of the front panel User LEDs can be configured. The LED is on
when the output level is high.
•
The serial protocol used by COM2 and COM4 can be either RS-232 or RS-422/485. Note
that COM4 is only available with the 'XVME-6300 Compatible I/O' build option.
•
The ID EEPROM on the SMBus can be configured as Read/Write or Read-Only.
•
The soldered-down SSD can be configured as Read/Write or Read-Only.
•
The XMC mezzanine modules can configured as Read/Write or Read-Only.
XMC Slot A is the lower slot. XMC Slot B is the upper slot.
Note the mezzanine must support use of the MVMRO signal.
•
The rear DVI-D port can be enabled/disabled.
4.2 Drivers and Utilities
Drivers and Utilities for the XVME-6700A can be downloaded from Acromag's website
at
