Acromag, Inc. Tel: 248-295-0880
- 28 -
Model SP33X-0700
4-Wire DC I/V Signal Splitter w/USB
USB OTG Cable
USB OTG Cable
–
Order 5028-565
•
USB OTG Cable 5028-565
This is a 6 inch, USB On-The-Go cable for connection between the USB A-mini B
Cable and a mobile phone or tablet. It is required to use the Acrom
ag Agility™
Config Tool App.
Note that the Acromag Agility ™ Config Tool is available free of charge, online at
the Google Play store.
DIN Rail Bus Connector Kit
Bus Connector Kit for DIN Rail Connection to Power
–
Order TTBUS-KIT
This kit contains one each of the following terminals
•
DIN Rail Bus Connector 1005-063 for 17.5mm TT/SP Modules.
•
Left Side terminal block, female connector 1005-220.
•
Right Side terminal block, male connector 1005-221.
•
Two End Stops for 35 mm DIN Rails 1027-222 (not shown).
Series SP splitters are shipped with their bus port plugged. Remove this plug and
insert DIN Rail Bus Connector 1005-063 shown at left, which allows multiple units
to snap together. Then add a left-side or right-side terminal block to connect the
bus to power. These terminals can be used to optionally (or redundantly) drive
power to Series TT or SP modules via the DIN rail bus connector, and allowing
modules to neatly and conveniently share a connection to Power. Two end stops
1027-222 are used to secure the terminal block and module for hazardous location
installations and are not shown.
End Stops
Two End Stops
–
Order 4001-252
•
Two 1027-222 End Stops for 35 mm DIN Rail mounting
For hazardous location installations (Class I, Division 2 or ATEX / IECEx Zone 2), you
can use two end stops (Acromag 1027-222) to help secure modules to 35mm DIN
rail (not shown).