2-7
Wall-Mounting Installation
Follow these steps to mount the unit to a wall or other flat surface.
1. Use a screwdriver to remove the two screws that secure the DIN-Rail clip to the back of the
switch.
2. Use a screwdriver to attach the wall-mounting plate to the rear panel of the switch using the
six screws provided. Tighten these screws to secure the switch to the wall-mounting plate.
3. Use the slotted holes at each corner of the wall-mounting plate to attach the unit to the wall
or other flat surface.
4. To remove the unit from the wall and from the wall-mounting plate, reverse steps 1-3.
