23
Pulse 1 output
Total
merit,
total reactive
power, total
vision
Set the energy pulse type of the 17 and 18
pulse output terminals
According to user needs
settings, the default is
always active.
Pulse 2 output
1s/imp
、
0.01kwh
、
0.1kwh
、
1.0kwh
、
10kwh
、
100kwh
Set the type of 19, 20 pulse output terminals.
1s/imp: second pulse output
0.01kwh: indicates that every 0.01kwh of
active energy meter outputs 1 pulse output,
0.1kwh, 1.0kwh, 10kwh, 100kwh and so on.
According
to
user
requirements, the default is
1s/imp.
Voltage shielding
0~9.99%
Voltage measurement mask value
According
to
user
requirements, the default
value is 0.20%.
Current shielding
0~9.99%
Current measurement mask value
According
to
user
requirements, the default
value is 0.20%.
Center line current
shield
0~9.99%
Centerline current measurement mask value
According
to
user
requirements, the default
value is 0.20%.
6.3 Communication Setting
On the main interface, press Menu to enter the menu interface, press
∨
until
“
Parameter Setting
”
is
highlighted, and press
√
to enter the parameter setting interface. Press
∨
until
“
Communication Settings
”
is
highlighted, press
√
to enter the communication settings interface. Press
∧
or
∨
to switch the communication
setting item, press Enter to enter the setting of the item, press + or - to change, press > to shift, after the current item
setting is changed, press Exit to exit the item setting. Continue to repeat the above steps to modify the settings. After
the change is completed, press Exit to enter the password. The default password is 0001 (customer can change the
password according to the password setting set by 7.11 system. If you forget the password, you need to contact us).
Press SaveExit to save the changes and exit, press Esc to exit without saving the changes.
Setting item
range
Modbus address
1~247
1st baud rate
1200
，
2400
，
4800
，
9600
，
19200
，
38400
