4
SPIDER
About SPIDER
SPIDER is a universal control with functions for pump control, data collection, alarm management,
groundwater lowering etc.
SPIDER is developed and produced in Denmark. SPIDER complies with all specifications regarding
placement of electronic components in harsh environments.
Funktions
•
Advanced 1 and 2 pump control with empty/fill function and internal pump alternation.
•
Build-in GSM/GPRS Modem.
•
Multi-protocol: Modbus RTU/TCP & COMLI. SPIDER auto-detects the protocol used by the SCADA
system.
•
Click connection for a joystick-equipped gr
aphic 2,4” OLED display directly onto SPIDER.
•
Possibility to connect a 7” color touch
-sensitive display via a serial HMI interface.
•
Validated flow calculation where the pumps capacity is dynamically calculated.
•
Status words function that can take a failed pump out of operation.
•
Emergency control function via a float switch when a pressure transmitter fails.
•
Indication of required pump service where SPIDER informs that a pump has reduced capacity.
•
Built-in power bank that maintains control during power failures and sends an alarm to SCADA.
•
Daily running of pumps so they do not seize after long idle periods.
•
Daily depth pumping to avoid top sediment layer.
•
Choice of various start levels to prevent sediment accumulation at liquid entrance point.
•
Configuration of SPIDER via ACOWA ZOO software, both locally (Micro USB cable) or via server setup.
